Applications which might gain more importance in the future are Construction material for the plasma chamber in magnetohydrodynamic power generation (W and W-Cu) and target plates in fusion reactors (W, W-La2O3).
Recent plasma experiments and theoretical and numerical studies show that tungsten may be the best, if not the only, material to withstand the extraordinary operating conditions in a nuclear fusion reactor divertor. The divertor, being that part of the vacuum vessel where the plasma particles interact with the first wall, and where a large fraction of the fusion heat is removed, consists of water-cooled copper heat-exchanger element covered with a plasma facing armor. The plasma particles (electrons, protons, and α-particles) are directed by the magnetic field toward the divertor target plates, where they are neutralized and pumped. The convective heat flux reaches 20 MW.m-2 and the attendant surface temperature more than 3000℃. Therefore, a suitable armor material must have a high thermal conductivity (in order to transfer high heat fluxes), low thermal expansion coefficient and low Young’s modulus (in order to keep thermal stresses low), and a high melting point and low sputtering yield (in order to keep erosion low). Although tungsten does not have as high a thermal conductivity and as low a Young’s modulus as carbon-carbon composite materials, which are foreseen for the sections of the divertor with the highest heat flux, many experts believe that, in the long run, reasonable lifetimes will only be achieved by tungsten divertor plates, which have the lowest erosion rates of all materials in sections of the divertor with relatively low plasma temperature but high particle density.
Low-pressure plasma technique
For the technical realization of low-pressure plasma processes, one requires equipment with the following components:
vacuum system (pump, vessel) energy supply gas supply measurement and control components for the reproducible adjustment of the process parameter Due to the necessity of a vacuum system in most cases, batch operation method is the easiest solution. The processes can be flexibly and complexly configured, in order to change the mode of action of the plasma through variation of the process parameters (pressure, gas flow, gas composition, power) and can attain different effects in one process step. So that, i.e. without great expenditure a secondary cleaning can be carried out and immediately thereafter a corrosion protection layer becomes deposited, without having to aerate in between.
Further advantages of low-pressure plasma technique:
ability of fissure-penetration by the plasma: even most complex sample geometries up to porous substrates can be treated no thermal or mechanical strain of the substrates high measure on environmental compatibility and operational safety
Chinatungsten Online has diverse facilities available for the various concepted questions (bulk material, batch goods, rail goods, size of the reactor up to 3m 3, MHz- and GHz stimulation); as well as many years of experience in the development of plasma processes and the conception of applicative plasma devices up to pilot graduations.
Within the bounds of its function as service provider in technology transfer, we offer its resources for the processing of the above-mentioned industrial questions up to series production. Our service comprises consultation, process development, sampling and industrial installation through pilot terotechnology.
Plasma Treatment – endless possibilities
Plasma can be used in many different cases whenever you would like to better adhere materials together or to change a surface property to suit your needs. With this trend-setting technology it is possible to modify virtually any surface. Plasma technology offers several versatile applications, for example:
Cleaning surfaces of any residues, oils, or contamination Activation of various materials before gluing, painting, etc. Etching and partial removal of surfaces Coating of parts with several possible types of layers (PTFE-like, protective barriers, hydrophobic, hydrophilic, friction-reducing, etc.) Plasma technology is establishing itself in all areas of industry, and new applications are constantly evolving.
Plasma Technology - Convincing Advantages
Compared to other methods, like flame treating or using chemicals to treat a surface, plasma technology exhibits many important advantages:
Many surface properties can be obtained exclusively with this procedure Can be used in online production or operated independently nvironmentally friendly process Regardless of geometry you are able to treat powder, small parts, discs, fleece, textiles, tubing, bottles, circuit boards, etc. Fabricated parts will not be mechanically changed Heating of the parts is minimal Operating costs are very low Extremely safe to operate Process is extremely energy efficient
Tungsten alloy is a suitable material for construction parts for plasma technique/ion propulsion. So if you have any interest in this product, please feel free to email us: sales@chinatungsten.com or call us by: 0086 592 512 9696, 0086 592 512 9595.
|