Tungsten copper rod CTE (Coefficient of Thermal Expansion) represents the variation of length by temperature changes under constant pressure. And the unit of metal CTE is 1/℃. More details of tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod.html Tungsten copper rod CTE can be divided into linear expansion coefficient α, superficial expansivity β and volume expansion coefficient γ. When the temperature change is not very large, α becomes a constant, it can represent both solid and liquid volume expansion as follow: Vt…
Tungsten Copper
The capability of current conduction is called as conductivity. Different proportion tungsten copper rod has different conductivity, which higher Cu content rod has higher electrical conductivity. Usually use σ to represent its conductivity. More details of tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod.html Generally, metal, semiconductor, an electrolyte solution or molten electrolyte, and some non-metal can conduct electricity. Tungsten copper rod belongs to metal conductor. The conducting capacity of no-electrolyte depends on the outer free electrons and atomic crystal structure, such…
The capacity of resisting a hard object pressed into its surface is called as hardness in physics. And tungsten copper rod hardness is the basic indicator to evaluate the materials if soft or hard. More details of tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod.html Tungsten copper rod hardness can be divided into scratch hardness, indentation hardness and rebound hardness. Scratch hardness: Mainly used to compare the hardness of minerals, the method is selected from the soft end of a hard rod…
The mass of some substance per unit volume is called density of this material, which is a reflection of the physical properties of the material in physics. Tungsten copper rod density is a kind of feature itself, which does not change with mass or volume. More details of tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod.html Weighing: Weigh the mass of metal block by balance, record as m; The amount of water injected into the cylinder, readout volume V1; Get the block…
Compared with common blank rod, it has better performance in roughness and surface quality. And common copper electrode has large consumption, low precision and efficiency when processing tungsten carbide, high carbon steel, hardened tool steel, while tungsten copper has greatly improved the efficiency and accuracy. Tungsten copper not only has good electrical conductivity, high soften temperature, wear and corrosion resistance, long service life and low frequency of electrode correction, but also save the production costs based on improving efficiency. More…
Tungsten copper blank rod is composed of high purity tungsten powder and copper powder, by isostatic pressing, high temperature sintering, melting refined copper infiltration process. More details of tungsten copper blank rod please visit http://www.tungsten-copper.com/tungsten-copper-rod-blank.html tungsten copper blank rod pictureCompared with polished rod, it has lower surface roughness, but it still has high hardness, high density, high strength, good thermal and electrical conductivity, plasticity, arc breaking performance, low CTE and dimensional stability.
Tungsten copper W90 rod is composed of 90% W and 10% Cu, its density is up to 16.75g/cm3, hardness reaches more than HB260, the bending strength is 1160MPa, the conductivity is 27%IACS and the softening temperature is more than 900℃. More details of W90 tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod-W90.html W90 tungsten copper rod pictureOwing to W takes up the most of parts, tungsten copper W90 rod is hard, but its toughness and ductility is not so good so that…
Tungsten copper W85 rod is composed of 85% W and 15% Cu, its density reaches(15.90g/cm3), hardness more than HB240, electric conductivity is 38%IACS, softening temperature is ≥900℃, thermal conductivity coefficient is between 180-200 (wm/k) and the coefficient of expansion is 7.0-7.5 (10-6k). More details of W85 tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod-W85.html W85 tungsten copper rod pictureTungsten copper W85 rod manufactured by PM (Powder Metallurgy) and has excellent thermal, electrical conductivity, high-temperature strength and plasticity, which is a kind of…
W80 tungsten copper rod is composed of 80% W and 20% Cu so that high hardness and melting point characteristics of tungsten is more obvious. Its density is up to 15.15g/cm3, hardness reaches more than HB140, but due to less Cu, conductivity is decreasing to 34%IACS, softening temperature is ≥900℃,the bending strength is 980, the thermal conductivity is 190-210(wm/k) and the coefficient of expansion is 8.0-8.5(10-6K). More details of W80 tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod-W80.html W80 tungsten copper rod…
W75 tungsten copper rod is composed of 75% W and 25% Cu, which not only has high density (14.50g/cm3), high hardness (≥HB195), high strength, but also has good conductivity (%38IACS), softening temperature is ≥900℃, thermal conductivity coefficient is between 200-230 (wm/k) and the coefficient of expansion is 9.0-9.5 (10-6k). More details of W75 tungsten copper rod please visit http://www.tungsten-copper.com/tungsten-copper-rod-W75.html W75 tungsten copper rod pictureWith the perfect arrangement of W and Cu, tungsten copper W75 rod provides a best way to…